Rear swing arm axle / bolt Tomos A3 / A35 / various models M12x120mm + needle bearings Btuning

New high-tech rear swing arm axle set from Btuning with needle bearings, exclusively at Tomoshop!

• 7-piece A-quality set with needle bearings
• With M12x1.25 120mm bolt
• The needle bearings are equipped with a rubber seal on both sides, so no dust/dirt can get into the bearings

Please note: the needle bearings must always be pressed into the frame. These must therefore not be installed with a hammer or by any other means.

The set contains the following parts:

• 2x needle bearing
• 1x large spacer bushing
• 1x M12x120mm bolt
• 1x M12x1.25 self-locking nut
• 2x M12 washers

Tomos models

• Tomos Classic
• Tomos Flexer
• Tomos Funtastic
• Tomos Limited
• Tomos Luxe
• Tomos Pack’R
• Tomos Quadro
• Tomos Racing AT
• Tomos Revival / Tomos Revival TS
• Tomos Sport’R
• Tomos Sprint
• Tomos Standard
• Tomos Streetmate
• Tomos Super Tom
• Tomos Taxxity
• Tomos A3
• Tomos S25
• Tomos Wizz’rd
• Tomos Youngst’R